Function of the thermostat in the engine coolant thermostat housing assembly- Taizhou Kelong Plastic Mould Co., Ltd.

The thermostat in the engine coolant thermostat housing assembly serves a critical function in regulating the flow of coolant through the engine and the cooling system. Its main purpose is to maintain the engine at its optimal operating temperature for efficient and reliable performance. The thermostat achieves this by controlling the flow of coolant based on the engine's temperature, opening or closing as needed to ensure the engine remains within the desired temperature range.

Temperature Sensing: The thermostat contains a temperature-sensitive element, often made of wax or bimetallic material. As the engine starts and begins to warm up, the surrounding coolant temperature also rises.

Closed Position (Cold Engine): When the engine is cold, the thermostat is in the closed position. In this state, the thermostat valve blocks the flow of coolant from the engine to the radiator, directing the coolant to circulate within the engine block only. This restriction helps the engine reach its optimal operating temperature quickly during cold starts.

Opening Process: As the engine's temperature rises and reaches the predetermined operating temperature, the temperature-sensitive element inside the thermostat expands. This expansion causes the thermostat valve to open gradually.

Open Position (Operating Temperature): Once the thermostat is fully open, it allows the flow of coolant from the engine to the radiator. This enables the coolant to absorb excess heat from the engine and transfer it to the radiator, where it dissipates through the cooling fins.

Temperature Regulation: By opening and closing in response to the engine's temperature, the thermostat helps maintain a consistent operating temperature for the engine. It ensures that the engine neither runs too cold nor overheats, as both scenarios can negatively impact performance and fuel efficiency.

Continuous Cycle: The thermostat operates in a continuous cycle, responding to changes in the engine's temperature. As the engine cools down during idle or low-load conditions, the thermostat gradually closes, reducing the coolant flow to maintain the optimal temperature.

Engine Coolant Thermostat Housing Assembly A04070 OE# 11537644811

Process Analysis of BMW B48 TU Series Engine

The rapid development of automotive engine technology calls for better and better engine cooling systems. The BMW Group has adopted the newly developed stepped-cooling control technology for its new generation of B48 TU engines.