How do you keep your car service in good working order?- Taizhou Kelong Plastic Mould Co., Ltd.

Always use the correct plastic engine coolant flange - there are many coolants on the market, but only use coolants made for your car make and model, never mix coolants made for other cars. Aluminum and copper brass radiators may have different needs and standard coolant may not be sufficient

Flush your plastic radiator cap regularly - Flushing your radiator every 12 months or 15,000 miles and changing your engine coolant will remove corrosion and dirt buildup and keep your radiator in good running condition.

Check for leaks and maintain hoses - When changing car oil, check radiator hoses for leaks and ruptures. Check for rusted clips and check that the gasket on top of the radiator is still in good condition. Look under the engine for obvious signs of leaks or dripping water.

Controlling Fluid Levels - Checking the coolant level is critical. Not only does it keep your car from overheating in hot weather, but it also keeps liquids from freezing in freezing weather.

Don't overload your car - the more weight it has to transfer, the harder your radiator will have to work to keep it cool. Overloading a vehicle is a major cause of overheating because it increases the pressure on the engine, putting it under additional stress.

How long can a heater in a car last?

Many grilles are designed to extend the life of your vehicle. A well-maintained glaze will last at least 8 to 10 years if properly maintained. However, in some cases, you may need to replace the radiator as soon as possible to keep your car running safely.

If you look at your car's MOT history, a common MOT failure is low coolant causing the engine to overheat. Not only can an overheated engine fail the MOT, but it can also cause the engine to fail completely.

What is the reason for a cracked radiator?

Overheating or high coolant pressure inside the radiator can cause cracks due to a malfunctioning thermostat or leaking gaskets. The ability of the radiator to be cooled by outside air is hindered by the summer heat. Overheating and radiator cracking can occur if the radiator fluid is not maintained.

My radiator is empty but my tank is full

A burst head gasket is a typical cause of a full coolant reservoir but not enough radiator coolant. Combustion gases from one of the cylinders seep into the cooling system, forcing coolant from the engine into the reservoir. When the reservoir is full, the remaining water flows through the plastic auto engine water pipe overflow.

The radiator as well as the cooling system should be completely filled with liquid. The excess water flows into the overflow tank as it heats up and expands, and the level increases from the cold mark to the hot mark. When the engine cools, the coolant from the expansion tank should return to the radiator.

TESLA Water Pipe 1077577-00-B

✔️ OE Part Number: OE# 1077577-00-B

✔️ Easy installation - This Water Pipe is a direct replacement, easy installation and high sealing, perfect match for the original car and work like the original part.

✔️ Quality Assurance - This Water Pipe is made of premium plastic, not easy to deform and durable in use. One year warranty.